5. In action fourteen, when putting in the tracks (DD) into the wood blocks (R), contain the picket block stick out around an inch past the edge with the tracks for the aspect which will attach to the tip piece (K and the rest). One other two blocks needs to be flush with the end of the tracks that connect to the cabinet piece.We have not obtained
five. In phase 14, when setting up the tracks (DD) on the Wooden blocks (R), hold the wooden block adhere out around an inch past the sting in the tracks to the aspect that will attach to the end piece (K and The remainder). The other two blocks must be flush with the end of your tracks that attach to the cabinet piece.Your recently seen things and
I produced all of them flush in the beginning which brought on the tracks to not be extended ample, Therefore the 3rd leaf overlapped the sting with the table by about one centimeter. Leaving that more inch (of your block sticking past the tracks) will help you to appropriately increase the table, add the third leaf, then thrust the table closed in
I built them all flush at first which brought about the tracks not to be prolonged enough, so the third leaf overlapped the sting with the table by about a single centimeter. Leaving that extra inch (of the block sticking past the tracks) will allow you to adequately extend the table, incorporate the third leaf, then thrust the table closed just be
I manufactured all of them flush at first which triggered the tracks not to be long plenty of, so the 3rd leaf overlapped the edge from the table by about one centimeter. Leaving that excess inch (of your block sticking earlier the tracks) will let you correctly prolong the table, incorporate the 3rd leaf, then push the table shut prior to latching